D-Link Airspot DSA-3100 Quick Installation Manual page 3

Connecting The DSA-3100 To Your Network
(continued)
A. Power on the DSA-3100.
B. Connect an Ethernet cable from the Public LAN port to a switch or wireless
access point on your public network. The Public LAN LED will illuminate to indicate
a proper connection. If the Public LAN LED doesn't light up, please check the
connections.
C. Connect an Ethernet cable from the Private LAN port to an Ethernet port on your
private network's switch. If properly connected, the Private LAN LED will illuminate.
(Note: For configuration purposes a computer can be connected directly to this
port using a standard Ethernet cable)
D. Attach an Ethernet cable to the WAN port on the back panel of the DSA-3100.
Connect the other end to a router or directly to a broadband modem. The WAN
LED light will illuminate to indicate proper connection.
When you have completed the steps in this
network should look similar to this:
Quick Installation Guide, your connected
3