Table of Contents
Advertisement
Super X11DPX-T User's Manual
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Tools Needed
Location of Mounting Holes
DESIGNED IN USA
X11DPX-T
REV:1.01A
BIOS
LICENSE
PCH
IPMI CODE
Notes: 1. To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2. Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Philips
Screwdriver (1)
BMC
LAN
CTRL
BAR CODE
SAN MAC
MAC CODE
24
Philips Screws (14)
CPU2
CPU1
Standoffs (14)
Only if Needed
Advertisement
Table of Contents
