Display Description; Power Supply - Excell QW User Manual

EXCELL PRECISION CO., LTD

1-4 Display Description

HI : Upper limit
: Value between HI and LO
OK
: Lower limit
LO
: Unit "kilogram"
kg
: Unit "pound"
lb
: hk tael
t
Pcs : Counting mode indication
: Zero point indication
0
 
: Net weight indication
Net

1-5 Power Supply

Power Supply Selection
➀ 230Vac ±15％, 50/60Hz, 10W (plugged-in)
➁ 6V / 4Ah rechargeable battery
Power Consumption
Approximately DC 31 mA (Indicator + Load Cell)
Approximately DC 65 mA (Indicator + Load Cell + Display backlight)
Approximately DC 80 mA (Indicator + Load Cell + Wireless 100M)
Approximately DC 65 mA (Indicator + Load Cell + Wireless 10M)
Charging Voltage
DC 10V/1A
Low Battery Warning
Please note when the (
should be recharged.
 The scale will turn off automatically after a few hours when the low battery warning
symbol shows up. The scale must be fully charged, before operating again.
 When the battery status indication is full, the power is about 6.1V; Each block is about
0.2V; When the battery warning symbol shows up, the power is about 5.4V.
02005159
: Low Power indication
1 : (STABLE) stable indication
2 : (GROSS) gross weight indication
3 : (
4 : ( PT ) pre-tare indication
5 : Range 2
6 : Range 1
7 : M+
) symbol keeps flashing on the display, the internal battery
8
) unit weight insufficient indication
Pcs
ZSME300000350