EXCELL PRECISION CO., LTD
2-2-7 Reset Auto Transmission
Select
in the RS232 serial interface setting mode
Transmission.
Press
key
TARE|PT
Use
or
keys to
ZERO
UNIT
key in the desired
parameters
Press
key
TARE|PT
Key in the parameter "00"
Press
key to exit
TARE|PT
When the value of "Auto transmission at zero" set as
transmission at zero" function is not available. Because when the scale is at zero and
keeping stable, the data are keeping transmitted, and that would be the same as
"Continuous Transmission".
02005159
Resetting auto transmission
The LCD shows the last setting
Default setting:
Resetting auto transmission
Use
or
ZERO
desired parameters:
ZERO key Upward key (0~9 digit entry)
1
UNIT key Downward key (0~9 digit entry)
1
TARE|PT key Move cursor rightward
1
NET|GROSS key Move cursor leftward
1
32
to Reset Auto
keys to key in the
UNIT
=
00 division of weight value
=
01 division of weight value
=
99 divisions of weight value
, the "Auto
ZSME300000350