Hold Function Settings - Excell QW User Manual

EXCELL PRECISION CO., LTD

2-1-4 Hold Function Settings

 For OIML or NTEP approval models,
hold=0
Press key
TARE|PT
Use or key to
ZERO UNIT
key in the parameters
Press key
TARE|PT
= Hold function disabled
= "Peak hold" mode
The scale keeps displaying the maximum weight when the weight is continually
changing. Press any key to exit this mode.
= "Stable hold 1" mode
When the weight is stable, the LCD shows the current weight value. Press any
key to exit this mode.
= "Stable hold 2" mode
When the weight is stable, the LCD shows the current weight value. When the
weight returns to zero (<10d), the hold mode is cancelled automatically.
"Animal scale hold 1" mode
=
When no load, the display shows "- - - - - -". After the animal or object is on the
platter and the weight is stable, the display shows the weight value and hold.
When the animal or object is off the platter, the display shows " - - - - - - " and the
hold function is off. If the weight is hardly stable, display shows the average
weight in 10 seconds and holds the status, until the weight is less than 10e and
display shows "- - - - - -" or press any key to calculate a new weight.
"Animal scale hold 2" mode
=
When no load,the display shows "0.000". After the animal or object is on the
platter and the weight is stable, the display shows the weight value and hold.
When the weight added or removed on the platter is larger than the weight set in
hold 5, the hold function release and to calculate a new weight. If the weight is
hardly stable, the display shows the average weight in 10 seconds and holds the
status. In this mode,
02005159
Hold function setting
LCD displays the last parameter setting
Hold function setting
Use
parameters

0  Hold function disabled
1  "Peak hold" mode
2  "Stable hold 1" mode
3  "Stable hold 2" mode
4  "Animal scale hold 1" mode
5  "Animal scale hold 2" mode
ZERO key  Upward key (0~9 digit entry)
1
UNIT key  Downward key (0~9 digit entry)
1
TARE|PT key  Move cursor rightward
1
NET|GROSS key  Move cursor leftward
1
and keys are useless.
ZERO TARE|PT
18
setting cannot be changed, and
or keys to key in the
ZERO UNIT
Default setting = 0
ZSME300000350