Auto Transmission At Zero - Excell QW User Manual

EXCELL PRECISION CO., LTD

2-2-6 Auto Transmission at Zero

Select in the RS232 serial interface setting mode
Auto Transmission at Zero.
Press key
TARE|PT
Use or keys to
ZERO UNIT
key in the desired
parameters
Press key
TARE|PT
Key in the parameter "00"
Press key to exit
TARE|PT
 When the value of "Auto transmission at zero" set as
transmission at zero" function is not available. Because when the scale is at zero and
keeping stable, the data are keeping transmitted, and that would be the same as
"Continuous Transmission".
02005159
Auto transmission at zero
LCD shows the last setting

Default setting:
Auto transmission at zero
Use ZE RO or UNIT keys to key in the desired
parameters:
ZERO key  Upward key (0~9 digit entry)
1
UNIT key  Downward key (0~9 digit entry)
1
TARE|PT key  Move cursor rightward
1
NET|GROSS key  Move cursor leftward
1
31
to set the
= 00 division of weight value
= 01 division of weight value
= 99 divisions of weight value
, the "Auto
ZSME300000350