EXCELL PRECISION CO., LTD
1-7 Self-Test Mode
When power is off, hold
to enter "Self-Test Mode"
Press
Press
Press
Press
ZERO
INTERNAL VALUE MODE
Press
key to enter, and the display shows internal value
TARE|PT
Please check the internal value is within normal range is 0 ~ 400000 (no load)
Check whether the backlight is on
Press
key to back to the last screen, the display shows
ZERO
KEYPAD TEST MODE
Press
TARE|PT
Keypad's internal code:
M+|PRINT key = 03,
1
Press
key to back to the last screen , the display shows
ZERO
FIRMWARE VERSION DISPLAY MODE
Press
TARE|PT
Press
TARE|PT
Press
key to back to the last screen, display shows
ZERO
BACK TO THE LAST SCREEN
Press
key to exit self-test mode, the scale will re-power on automatically.
TARE|PT
02005159
key and press
NET|GROSS
.
key
ZERO
key
ZERO
key
ZERO
key
key to enter, display shows
key = 06,
TARE|PT
F key = 02
key to enter , display shows the firmware version
key again, the display shows maintenance number
key, Wait till display shows
ON|OFF
Press
Press
key
UNIT
Press
key
UNIT
Press
key
UNIT
(must hook up full-bridge Load Cell to test)
key= 05,
UNIT
11
key
UNIT
key=04
NET|GROSS
1
,
for 2 seconds
ZSME300000350