Hi/Lo/Ok Settings - Excell QW User Manual

EXCELL PRECISION CO., LTD

2-1-3 HI/LO/OK Settings

Select
function.
 When the high limit and low limit are both set as "0", the Hi/Lo/OK function is disabled.
Press key
TARE|PT
Key in the desired high
limit value
Press key
TARE|PT
Key in the desired low limit
value
Press key
TARE|PT
Key in the parameter
setting for alarm
Press key
TARE|PT
ZERO key  Upward key (0~9 digit entry)
1
UNIT key  Downward key (0~9 digit entry)
1
TARE|PT key  Move cursor rightward
1
NET|GROSS key  Move cursor leftward
1
02005159
in the general function setting mode
.
.
.
.
lb
LCD displays the last status
lb
lb
LCD displays the last status
lb
LCD displays the last status
Alarm setting
(a)(b)(c)
The definition of a, b, c positions:
(a)  1 = beep sound on
0 = beep sound off
(b)  1 = beep sound on when stable
0 = beep sound on when unstable
(c)  1 = beep sound on when the weight is
0 = beep sound on when the weight is
17
to set the HI/LO/OK
between high and low limits
not between high and low limits and
higher than 10d
ZSME300000350