Table of Contents
Advertisement
Port remote
Idle
Super Admin Access
The DI-701 supports a super-admin mode that is typically reserved by the ISP or other service
provider. It allows a user limit to be set via the usrlimit command in terminal mode. To login
with Super Admin access, the factory default password is "year2000". At boot up, when
prompted for the password enter "year2000". The command prompt will change from
"command>" to "admin>". It is recommended you change this password as quickly as
possible to ensure that the device is more secure.
usrlimit
Sets a limit on the number of maximum users that can use the DI-701 to share Internet Access.
Please note that once a limit is set, a normal command login will no longer have security rights
to change the number of addresses in the IP pool. The Set command will no longer provide
this as an option. However, the Show command will display the current usrlimit setting as the
size of the pool. To remove the limit, simply enter the limit as 0.
Example:
D-Link IShare, version 2.00
Administrator password : ********
ADMIN>usrlimit
Connective users is limited to 32
Input user limit number, or <ESC> to escape.
Set new user limit number (0 to 128) : 2
Save configuration and reboot ...
System starts up
D-Link IShare, version 2.00
Administrator password :
the port number for the remote computer
idle interval (in seconds) since last network frame transaction
45
Advertisement
Table of Contents
