Setting Up - BT 3010 Classic User Manual

Diverse 3010 User Guide

Setting up

Your handset is already "registered"
to the Diverse 3010 Classic base
station.
Plan where you will put your Diverse
3010 Classic. It should be within two
metres of a power socket and the
phone socket.
Plug the power cable into the power
socket on the underside of your
Diverse 3010 Classic. Take care that
the telephone line cord and power
cable plugs are connected to the
correct sockets. Incorrect placement
could damage the station.
22/3/01 1:33 pm Page 9
Use only the power adaptor
C39 280-Z4-C174/..–C67 with your
Diverse 3010 Classic.
The handset uses the two AA size nickel
cadmium (NiCad) batteries, which are
supplied. To install them, insert the
batteries as indicated on the inside of the
battery compartment (or in the picture
on the next page) and slide the battery
compartment cover shut.
9