Using Caller Display And Call Waiting - BT 3010 Classic User Manual

Diverse 3010 User Guide
Using Caller Display and
Call Waiting
If you subscribe to Caller Display you
can see who is calling you (on your
handset display). If you are on a call
and you also subscribe to a Call Waiting
service, the second incoming call
number will appear on the handset
display and you will hear an intermittent
beep through the handset. This is to alert
you to another caller waiting to speak
to you.
With BT's Caller Display and Call
Waiting service, your Diverse base
station receives caller information
which is transmitted over the BT
network. This includes the date and
time of the call.
If you are using the Classic handset,
the screen shows the caller's number
(if it has been sent) when the phone
rings. With the Executive handset if you
have stored a name to go with the
number in your handset directory, the
name will be displayed instead.
22
22/3/01 1:33 pm Page 22
Press the
R
Your 1st caller is put on hold
whilst you speak to your 2nd
caller.
To speak to your 1st caller
again you can either:
Press the
R
again and you will be
reconnected to your 1st caller,
your 2nd caller will be put on
R
hold. You can use the
button to toggle between the
two callers.
Or
Press the
to end the conversation with
the caller you are currently
speaking to. The handset will
ring again.
Press the
button and you will be
reconnected to the caller who
was on hold.
button.
button
button