Item No.
U250
Setting the maintenance cycle
Description
Displays, clears and changes the maintenance cycle.
Purpose
To check and change the maintenance cycle.
Method
1. Press the start key. The currently set maintenance cycle is displayed.
Setting
1. Select [M.Cnt A] using the cursor up/down keys.
2. Change the setting using the cursor left/right keys or numeric keys.
Description
Maintenance cycle
3. Press the start key. The value is set.
Clearing
1. Select [Clear] using the cursor up/down keys.
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Service Manual
Description
Setting range
0 to 9999999
1-3-30
2PV/2PW
Initial setting
200000
Y116650-5