Detaching And Refitting The Power Source Inlet - Olivetti d-Color MF2613En Service Manual

(3) Detaching and refitting the power source inlet

Procedure
1. Remove the power source PWB (see
page 1-5-29).
2. Remove the connector and release the
hook and then remove the right fan
motor.
3. Remove the screw of the grounding
wire.
Y116650-5
Hook
Figure 1-5-147
Grounding wire
Figure 1-5-148
1-5-91
2PV/2PW
Connector
Right fan motor
Screw
Service Manual