Bosch EasyAquatak 100 Original Instructions Manual page 15

OBJ_BUCH-3244-001.book Page 14 Thursday, October 26, 2017 10:08 AM
14 | English
chine. Local regulations may restrict
the age of the operator.
 Children should be supervised to en-
sure that they do not play with the
machine.
 The unit must never be left unsuper-
vised while the unit is switched on.
 The water jet from the high-pressure
nozzle produces a recoil on the gun.
You should therefore hold the gun
and spray lance firmly.
 The product should not be held by the
operator whilst in operation and
should be kept in an upright position
as illustrated within this manual when
placed on the ground.
Transport
 Switch off the motor and secure the
unit before transporting.
Maintenance

Switch off the unit prior to all cleaning
and maintenance work and before re-
placing components. Pull out the
mains plug if the unit is mains-operat-
ed.
 Repairs may only be carried out by
authorised Bosch Service Centres.
Accessories and spare parts
 Accessories and spare parts which
have been approved by Bosch must
be used. Original accessories and
spare parts guarantee that the unit
can be operated safety and without
any breakdowns.
F 016 L81 745 | (26.10.17)
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
Movement direction
Weight
On
Off
Accessories
Intended Use
The product is intended for cleaning areas and objects out-
side the house, tools, vehicles and boats, if the appropriate
accessories such as cleaning agents approved by Bosch are
used.
Intended use is related to operation within 0°C and 40°C am-
bient temperature.
This product should not be used for professional use.
The product should not be held by the operator whilst in oper-
ation and should be kept in an upright position as illustrated
within this manual when placed on the ground.
Technical Data
Pressure washer
Article number
Rated power
Supply temperature max.
Supply rate min.
Allowable pressure
Rated pressure
Rated Flow
Maximum inlet pressure
Autostop function
Weight according to EPTA-
Procedure 01:2014
Protection class
Serial number
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other
equipment/machines may occur in case of unfavourable mains system
conditions. Malfunctions are not to be expected for system impedances
below 0.153 ohm.
Autogoods "130"
EasyAquatak 100
3 600 HA7 E..
kW 1.2
°C 40
l/min 5.5
MPa 10
MPa 6.7
l/min 4.8
MPa 1

kg 3.7
/II
See serial number (rating plate)
on pressure washer.
Bosch Power Tools