Cleaning The Print Head Using The Product Buttons; Cleaning The Print Head Using A Computer Utility - Epson L380 User Manual

Cleaning the Print Head Using the Product Buttons

Cleaning the Print Head Using a Computer Utility

Parent topic:
Related topics
Refilling Ink
Cleaning the Print Head Using the Product Buttons
You can clean the print head using the buttons on your product.
1. Make sure no product lights are indicating errors.
2. Load a few sheets of plain paper in the product.
3. Hold down the
The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is
finished.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
4. Run a nozzle check to confirm that the print head is clean.
If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then check the print head nozzles and try cleaning the print head again, if necessary.
If quality still does not improve, flush the ink tubes.
Parent topic:
Related concepts
Power Ink Flushing
Related tasks
Checking the Nozzles Using the Product Buttons
Related topics
Loading Paper
Cleaning the Print Head Using a Computer Utility
You can clean the print head using a utility on your Windows or Mac computer.
1. Make sure no product lights are indicating errors.
2. Load a few sheets of plain paper in the product.
Print Head Maintenance
stop button for 3 seconds to start the cleaning cycle.
Print Head Cleaning
90