Product Makes Noise, But Nothing Copies; Copies Are Cut Off; Product Makes Noise When It Sits For A While - Epson L380 User Manual

Copies are Cut Off

Product Makes Noise When It Sits for a While

Parent topic:

Product Makes Noise, But Nothing Copies

If your product makes a noise, but nothing copies, try these solutions:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• If the nozzle check page does not print, but the product's power is on, make sure your product
software is installed correctly.
• Make sure your product is level (not tilted).
Parent topic:
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Copies are Cut Off
Depending on your product, the default paper size for copies is either A4 (8.3 × 11.7 inches
[210 × 297 mm]) or Letter (8.5 × 11 inches [216 × 279 mm]).
• To change the default paper size to A4 (8.3 × 11.7 inches [210 × 297 mm]), make sure the product is
turned off, then hold down the
on. When the product turns on, release both buttons.
• To change the default paper size to Letter (8.5 × 11 inches [216 × 279 mm]), make sure the product is
turned off, then hold down the
on. When the product turns on, release both buttons.
Parent topic:
Related topics
Copying
Product Makes Noise When It Sits for a While
Your product is performing routine maintenance. This is normal.
Parent topic:
Solving Problems
Solving Copying Problems
color copy button and press the
B&W copy button and press the
Solving Copying Problems
Solving Copying Problems
power button to turn the product
110
power button to turn the product