Fan Cowling - HP ProDesk 400 G4 Maintenance And Service Manual
Microtower pc small form factor (sff)
Hide thumbs
Also See for ProDesk 400 G4:
- Maintenance and service manual (113 pages) ,
- Hardware reference manual (53 pages) ,
- Disassembly instructions manual (17 pages)
Table of Contents
Advertisement
Fan cowling
Follow these steps to remove the fan cowling:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Remove the drive cage (see
4.
Position the computer with the rear panel toward you.
5.
Disconnect the power supply cable (1) from the system board.
6.
Release the power supply cable from the four retention clips (2) built into the fan cowling.
7.
Spread the fan cowling retention tabs (3).
8.
Remove the fan cowling (4).
Reverse this procedure to install the fan cowling.
38
Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Access panel on page
24).
Drive cage on page
28).
23).
Advertisement
Table of Contents
Need help?
Do you have a question about the ProDesk 400 G4 and is the answer not in the manual?
Questions and answers