Rear panel components
(1)
(2)
(3)
(4)
NOTE:
When a device is plugged into the audio-in jack, a dialog box will open asking if you want to use the connector for
a microphone line-in device or a headphone. You can reconfigure the connector at any time by double-clicking the Audio Manager icon
in the Windows® taskbar.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and the integrated
graphics on the system board may be used at the same time. However, for such a configuration, only the display connected to
the discrete graphics card will display POST messages.
The system board graphics can be disabled by changing settings in Computer Setup.
Audio-in jack
RJ-45 (network) jack
Audio-out jack for power audio devices
DisplayPort monitor connector
(5)
VGA monitor connector
(6)
USB 2.0 ports (2)
(7)
USB 3.x ports (2)
(8)
Power cord connector
Rear panel components
3
Need help?
Do you have a question about the ProDesk 400 G4 and is the answer not in the manual?
Questions and answers