Hard Drive - HP ProDesk 400 G4 Maintenance And Service Manual

8. Remove the drive cage (3) by sliding it up and to the right at an angle.
Reverse this procedure to install the drive cage.

Hard drive

Follow these steps to remove a hard drive:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the drive cage (see
4. Remove the four Torx-15 M3.4×7.5 screws (1) that secure the hard drive to the drive cage.
Preparation for disassembly on page
Access panel on page
Drive cage on page 28).
24).
23).
Hard drive 29