Epson EB-710Ui User Manual page 98

Control Computer Features from a Projected Screen (Computer Interactive Mode)
• To use computer interactive mode and USB Display at the same
time, select USB Display/Easy Interactive Function.
• When projecting using USB Display, response time may be
a
slower.
• Using two interactive pens at the same time may cause
interference in some applications. Move the unused interactive
pen away from the projection screen.
• Select the Pen Operation Mode setting in the Easy Interactive
Function setting in the projector's Extended menu according
to the operating system of the connected computer.
s Extended > Easy Interactive Function > Pen Operation
Mode
h
Press the [Menu] button to exit the menus.
i
Make sure you have calibrated the first time you use your projector.
j
Hold an interactive pen close to the projected screen, or touch the
projected screen with your finger.
The icon is displayed on the projected screen.
a
• The icon is displayed on the right the first time. Next
time, it is displayed on the side from which you last opened the
toolbar.
icon is not displayed, set the Pen Mode Icon
• If the
setting to On in the projector's Extended menu.
s Extended > Display > Pen Mode Icon
k
Select the icon, and then select the
You can also change to computer interactive mode by doing the
a
following:
• Pressing the [Pen Mode] button on the remote control.
• Changing the Pen Mode setting on the projector's Extended
menu to PC Interactive.
s Extended > Easy Interactive Function > Pen Mode
You can now operate the computer using the interactive pen or your finger.
You can also operate the following:
• The Tablet PC input panel in Windows 7 or Windows Vista.
• Ink Tools for annotation in Microsoft Office applications.
g g Related Links
• "Windows Pen Input and Ink Tools"
• "Pen Calibration" p.83
• "Easy Interactive Driver System Requirements"
• "Installing Easy Interactive Driver on Mac"
icon.
p.109
p.254
p.100
98