Table of Contents
Advertisement
RUGGEDCOM RSG2300
Installation Guide
Certification
The RUGGEDCOM RSG2300 device has been thoroughly tested to guarantee its conformance with recognized
standards and has received approval from recognized regulatory agencies.
•
Section 6.1, "Standards Compliance"
•
Section 6.2, "Agency Approvals"
•
Section 6.3, "EMC and Environmental Type Tests"
Section 6.1
Standards Compliance
The RUGGEDCOM RSG2300 complies with the following standards:
• FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference on his own expense.
• Industry Canada Compliance
CAN ICES-3 (A) / NMB-3 (A)
• Other
▪ IEC 61000-6-2 (Generic Industrial)
▪ IEEE 1613 (Electric Utility Substations)
▪ IEC 61850-3 (Electric Utility Substations)
Section 6.2
Agency Approvals
Agency
CSA
CE
FCC
FDA/CDRH
ISO
Standards Compliance
Standards
CSA C22.2 No. 60950-1, UL 60950-1
EN 60950-1, EN 61000-6-2, EN
60825-1, EN 55022 Class A, EN 50581
FCC Part 15, Class A
21 CFR Chapter I, Sub-chapter J
ISO9001:2008
Comments
Approved
CE Compliance is claimed via
Declaration of Self Conformity Route
Approved
Approved
Designed and manufactured using an
ISO9001:2008 certified quality program
Chapter 6
Certification
39
Advertisement
Table of Contents
