Table of Contents
Advertisement
RUGGEDCOM RSG2300
Installation Guide
Communication Ports
The RUGGEDCOM RSG2300 can be equipped with various types of communication ports to enhance its abilities
and performance.
1
2
Figure 15: Port Assignment
Each type of module has a specific location in the RUGGEDCOM RSG2300 chassis:
• Slots 1 and 2 support any combination of two-port fiber or copper Ethernet modules up to 100 Mbps
• Slots 3 and 4 support any combination of fixed two-port 1 Gbps ports
• Slots 5, 6 and 7 house any combination of 8-port 10/100TX copper modules, up to a maximum of 24 ports
The exact configuration of the device can be determined by reading the factory data file through the ROS user
interface. For more information about how to read the factory data file, refer to the ROS User Guide for the
RUGGEDCOM RSG2300.
Each communication port is equipped with an LED that indicates the link/activity state of the port.
Figure 16: Port LEDs
1. Port LED
The following sections describe the available communication ports:
•
Section 3.1, "Copper Ethernet Ports"
•
Section 3.2, "Fiber Optic Ethernet Ports"
•
Section 3.3, "SFP Optic Ethernet Ports"
•
Section 3.4, "GBIC Optic Ethernet Ports"
3
5
4
1
6
7
LED State
Green (Solid)
Green (Blinking)
Off
Chapter 3
Communication Ports
Description
Link established
Link activity
No link detected
19
Advertisement
Table of Contents
