Factory Reset - Eiki EK-620U Service Manual

2.Service mode
Item Label
1

Factory Reset

2 Filter Wheel Index
3 Phosphor Wheel Index
4 Error Log
5 Mode Adjustment
6 Reset Projector Hours
7 Light Sensor Calibration Choose this function to execute ABC calibration
8 ADC Calibration
9 LD Hours
4-3 Factory Reset
After final QC step, we have to erase all saved
change again and restore the OSD default setting.
The following actions will allow you to erase all
end-users' settings and restore the default setting:
- Please get into service mode
- Select "Factory Reset"
- Press "Enter"
Restore all settings to their default value,It will not reset network
Adjust the R/G/B value to get perfect image when image loss some kinds of color
Adjust the R/G/B value to get perfect image when image loss some kinds of color
Record the times of the failure of power on of projector
Image adjustment of vertical and horizontal position
Reset Projector Hours
Choose this function to execute ADC calibration
Record the LD Hours
Description
EK-620U/EK-621W 4-2