How To Install The Refrigerator; How To Adjust Door Height - LG LSC27950SW Service Manual

HOW TO INSTALL REFRIGERATOR
1. How to Adjust Door Height of Refrigerator
I Make the refrigerator level first. (If the refrigerator is not installed on a flat floor, the height of freezer and refrigerator
door may not be the same.)
1) If the freezer door is lower than the refrigerator
door:
Insert a driver · into the groove ³ of the adjusting
screw and turn in the direction of the arrow (clockwise)
until the refrigerator is level.
3) When the refrigerator door is lower than the freezer door
Adjust the level when the refrigerator door is lower than the
freezer door during
the use of the refrigerator.
(1) Using the wide side of the tool for adjustment
keeper nut ³ (
) clockwise to loosen the keeper nut.
(2) Using the narrow side of the tool for adjustment, turn the
adjustment hinge pin · (
counterclockwise to level the refrigerator and freezer door.
(3) After setting the level of the door, turn the keeper nut (
counterclockwise to tighten.
Caution : Do not force too hard to level the height. The hinge
pin can be pulled out (Adjustable range of height:
Maximum of 2/10
Height
Difference
Height
Difference
, turn the
) clockwise or ( )
)
).
- 8 -
2) If the freezer door is higher than the refrigerator
door:
Height
Difference
Height
Difference
1 Adjusting
Screw
2
Driver
Insert a driver · into the groove ³ if the adjusting screw
and turn in the direction of the arrow (clockwise) until the
refrigerator is level.
Keeper nut
Adjustment
hinge pin
Tool for
adjustment
Up
Down