Toro Power Max 826 OE Operator's Manual page 4

1. Traction drive—squeeze the lever to engage; release the
lever to disengage.
2. Warning—read the Operator's Manual.
3. Cutting/dismemberment hazard, impeller—do not place your
hand in the chute; shut off the engine before leaving the
operating position, use the tool to clear the chute.
Briggs & Stratton Part No. 273676
1. Stop
2. Slow
Briggs & Stratton Part No. 275949
1. Choke on (choke)
Briggs & Stratton Part No. 276925
1. Warning—read the
Operator's Manual.
2. Warning—fire hazard.
Briggs & Stratton Part No. 277566
1. When starting a cold
engine, close the choke
and press the primer two
times.
Order Part No. 120-7194
3. Fast
2. Choke off (run)
3. Warning—toxic gas
inhalation hazard.
4. Warning—hot
surface/burn hazard.
2. When starting a warm
engine, open the choke
and do not press the
primer.
121-1240
4. Cutting dismemberment hazard, impeller—keep away
from moving parts; remove the ignition key and read the
instructions before servicing or performing maintenance.
5. Thrown object hazard—keep bystanders a safe distance
away from the snowthrower.
6. Auger/impeller drive—squeeze the lever to engage; release
the lever to disengage.
Briggs & Stratton Part No. 277588
1. Primer
2. Ignition key in
(Engine—run)
Briggs & Stratton Part No. 278866
1. Fuel—on
4
3. Ignition key out
(Engine—shut off)
2. Fuel—off