BT 1020 User Manual page 61

8423 Hub Phone 1020 Iss.3 [1]
4. Press the wireless association button. After 3 seconds the
phone LED starts to flash.
Press on the handset.
5. OK
The display shows
6.
You should then get confirmation that the handset is
registered.
The handset will automatically be allocated the next available
handset number which will be displayed when in standby mode.
12/10/07
Hub Phone 1020 – Issue 3 – Edition 1 – 05.10.07.07 – 8423
REGISTERING HANDSET. PLEASE WAIT
12:26 Page 61
Using additional handsets
If your handset is already registered to
a base, the
the right of the base number.
If there are already 5 handsets
registered to the base you will hear a
.
double beep.
Each digit of the PIN code will be
displayed as a
Press Clear
incorrect digit.
If you enter the wrong PIN code you
will hear a double beep.
61
symbol will be shown to
*
for security reasons.
*
if you enter an