Table of Contents
Advertisement
Miscellaneous parts
FRU descriptions
System miscellaneous kit:
• Antenna cable guide
• Bracket for the internal-storage-drive cable
• Microphone rubber for camera model
• Microphone rubber for non-camera model
Screw and tape kit:
• Screw for hinges, M2.5*L2.2 (8)
• Screw, M2*L2 (4)
• Screw, M2*L2.7 (24)
• Screw, M2.5*4, flat head (4)
• Screw, M2*L4 (18)
• Step screw, M2*L2.3 (8)
• Screw, M2.5*L4, flat head (4)
• Screw, M2*L3.2 (4)
• Screw, M2*L3.5, silver, small head (18)
• Illustration sheet for antenna
• Tape for fixing cable
Hinge bracket (available in the keyboard bezel assembly kit)
Smart-card-reader bracket (available in the keyboard bezel assembly kit)
dc-in bracket (available in the keyboard bezel assembly kit)
Label kit
Connector and cable guide
This section provides information to help Lenovo-authorized service technicians identify connectors and
cables for replacement purpose. To view each FRU and the exploded illustration of the computer, see "Major
FRUs" on page 51 and "LCD FRUs" on page 53.
Note: Depending on the computer model, some connectors or cables might not be available.
System board connectors and cables
No.
Connector/location
1
Memory module slot (internal)
2
Coin-cell battery connector (internal)
3 6
Keyboard connectors (internal)
54
A275 Hardware Maintenance Manual
Self-service CRU
No
No
No
No
No
No
Internal cable
None, with the memory module directly connecting
to the system board
Coin-cell battery with cable
Keyboard assembly with cables
Optional-service
CRU
No
No
No
No
No
No
Advertisement
Table of Contents
