System Board - HP ProBook 430 G4 Maintenance And Service Manual

System board

NOTE: All system board spare part kits include replacement thermal material.
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating systems
xxxxxx-601: Windows 10 operating system
Description
System board with processor:
Intel Core i7-7500U processor
Intel Core i5-7300U processor
Intel Core i5-7200U processor (WWAN models)
Intel Core i5-7200U processor
Intel Core i3-7100U processor (WWAN models)
Intel Core i3-7100U processor
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Service door (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
e. Battery (see
When replacing the system board, be sure to remove the following components (as applicable) from the
defective system board and install on the replacement system board:
● Memory modules (see
WLAN/Bluetooth module (see
●
● WWAN module (see
M.2 solid-state drive (see
●
● Heat sink (see
Remove the system board:
1. Position the computer upright on a flat surface.
Service doors on page
Hard drive on page
Keyboard on page 42)
Top cover on page
Battery on page 61)
Memory modules on page
WLAN/Bluetooth combo card on page
WWAN module on page
M.2 solid-state drive on page
Heat sink assembly on page
31).
33)
49)
35)
39)
41)
71)
Spare part number
905797-xxx
905796-xxx
905795-xxx
905794-xxx
905793-xxx
905792-xxx
37)
Component replacement procedures 67