Table of Contents
Advertisement
2.
Disconnect the following cables from the system board:
(1) Display cable
(2) Power connector cable
3.
Remove the 3 Phillips PM2.5×5.0 screws (1) that secure the system board to the computer.
4.
Lift the bracket from atop the USB-Type C port (2).
5.
Rotate the right side of the system board upward (3).
6.
Pull the hard drive cable through the hole in the chassis when removing the system board (4).
68
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Hide quick links:
Advertisement
Table of Contents
