System Board - HP 250 G6 Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal materials.
Description
System board (includes replacement thermal materials):
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating systems
xxxxxx-601: Windows 10 operating system
For use in models with discrete graphics memory
● Intel Core i5-7200U processor and 2 GB of discrete graphics memory
Intel Core i3-6006U processor and 2 GB of discrete graphics memory
●
For use in models with UMA graphics memory:
● Intel Core i7-7500U processor
● Intel Core i5-7200U processor
● Intel Core i3-6006U processor
● Intel Pentium N4200 processor
Intel Pentium N3710 processor
●
● Intel Celeron N3350 processor
● Intel Celeron N3060 processor
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
7. Remove the WLAN module (see
8. Remove the memory module (see
9. Remove the solid-state drive (see
To remove the system board:
1. Position the computer upright, and then disconnect the following cables from the system board:
(1): Power connector cable
(2): Display cable
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 32).
Optical drive on page
Bottom cover on page
WLAN module on page
Memory module on page
Solid-state drive (SSD) on page
33), if installed.
40).
43).
45).
53).
Spare part number
926248-xx1
926249-xx1
926246-xx1
926247-xx1
926249-xx1
934736-001
926251-xx1
934737-001
926252-xx1