System Board - HP 240 G6 Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal materials.
Description
System board (includes replacement thermal materials):
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating systems
xxxxxx-601: Windows 10 operating system
Intel Core i5-7200U processor
Intel Core i3-6006U processor
Intel Celeron N3060 processor
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
7. Remove the WLAN module (see
8. Remove the memory module (see
To remove the system board:
1. Position the computer upright, and then disconnect the following cables from the system board:
(1): USB board cable
(2): Display cable
(3): Power connector cable
(4): Power button board cable
(5): TouchPad cable
(6): TouchPad button board cable
(7): Keyboard cable
56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 30).
Optical drive on page
Bottom cover on page
WLAN module on page
Memory module on page
31), if installed.
37).
39).
41).
Spare part number
925422-xx1
925423-xx1
925425-xx1