Yamaha BLASTER YFS200S Owner's Manual page 267

1. Transmission oil filler cap
1. Bouchon de remplissage d'huile
1. Tapón de llenado del aceite
q
1. Drain bolt
1. Boulon de vidange
1. Perno de drenaje
1
Transmission oil replacement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes,
and stop it.
3. Place a container under the engine to col-
lect the used oil.
4. Remove the oil filler cap and drain bolt to
drain the oil.
5. Install the drain bolt and tighten it to the
specified torque.
Tightening torque
Drain bolt:
20 Nm (2.0 m0kgf)
6. Fill the engine with the recommended oil
and install the filler cap.
8-19