Selecting The Power Level; Controlling The Display Backlight - Motorola APX 7000 User Manual

1 Press the preprogrammed EZB Up or EZB Down
button to scroll the EZB up or down or press and
hold the preprogrammed EZB Up or EZB Down
button to fast scroll the EZB up or down.
2 Turn the 3-Position A/B/C Switch to select the
first, second or third zone in the selected EZB.

Selecting the Power Level

Note: This feature must be preprogrammed by a
qualified radio technician.
This feature enables you to reduce the transmit
power level for specific case that requires a lower
power level. You can select the power level at which
your radio transmits. The radio always turns on to the
default setting. These reduced transmit power level
settings do not affect the receiving performance of
your radio, nor diminish the overall quality of the
audio and data functionality of the radio given the
following conditions.
Power level Low enables a shorter transmitting
distance and to conserve power. Power level High
enables a longer transmitting distance.
Use the preprogrammed Transmit Power Level
switch to toggle the power level between low and
high power.
The display shows LOW PWR and the low power icon
or the display shows HIGH PWR and the high power
icon.

Controlling the Display Backlight

You can enable or disable the radio's display
backlight as needed, if poor light conditions make the
display or keypad difficult to read.
Note:
The backlight remains on for a preprogrammed time
before it automatically turns off completely or returns
to the minimum backlight level.
Perform one of the following actions:
• To toggle the backlight on or off, press the
preprogrammed Light/Flip button.
• To turn the backlight on, press any
programmable radio controls or buttons.
83
English