Data Profiles Available For Lte - Motorola APX 7000 User Manual

System Operation Scenarios
IV&D LTE and IV&D are mutually exclusive.
Both systems cannot operate at the same
time.
LMR
The radio is preprogramed to stop LTE
operation when radio switched to a LMR
700MHz frequency.
When the radio is switched to operate in
700MHz LMR, LTE operation is turned off.
The radio can still operate on 700MHz
LMR where the LMR voice and data are
available to the user.
LTE is operational again when the
frequencies are switched back to either a
VHF or a 800 MHz LMR frequency.
The LTE feature can be preprogrammed to a
programmable button for quick access to LTE screen
or to activate LTE feature. The LTE button must be
preprogrammed by a qualified technician before user
can use it.

Data Profiles Available for LTE

There are three different profiles available for LTE
data operation.
Broadband Use only LTE data transmission
Only network. In the absence of LTE
coverage, the radio has no data
functionality.
Trunking and Use LTE data transmission
Broadband network when available. When
LTE is not available or turned off,
the radio falls back to using IV&D
LMR data, if available. Once LTE
coverage becomes available
again, the radio reverts back to
using LTE data transmission
network.
Conventional Use LTE data transmission
and network when available. When
Broadband LTE is not available or turned off,
the radio falls back to using
Conventional LMR data, if
available. Once LTE coverage
becomes available again, the radio
79
English