Scan Lists - Motorola APX 7000 User Manual

that you were using before the radio was dynamically
regrouped.
Requesting a Reprogram (Trunking Only)
This feature allows you to notify the dispatcher when
you want a new dynamic regrouping assignment.
Press the preprogrammed Reprogram Request
button to send reprogram request to the
dispatcher.
The display shows RPGM and PLS WAIT.
If you hear five beeps, the dispatcher has
acknowledged the reprogram request. The display
shows ACK RCVD and the radio returns to the Home
screen.
If the dispatcher does not acknowledge the
reprogram request within six seconds, you hear a
low-pitched alert tone and the display shows NO ACK.
Classification of Regrouped Radios
The dispatcher can classify regrouped radios into
either of two categories:
Select Select-enabled radios are free to
Enabled change to any available channel,
including the dynamic-regrouping
channel, once the user has selected
the dynamic-regrouping position.
Select Select-disabled radios cannot change
Disabled channels while dynamically regrouped.
The dispatcher has forced the radio to
remain on the dynamic-regrouping
channel.
The Scan or Private Call feature cannot be selected
while your radio is Select Disabled.

Scan Lists

Scan lists are created and assigned to individual
channels/ groups. Your radio scans for voice activity
by cycling through the channel/group sequence
specified in the scan list for the current channel/
group.
Your radio supports different types of Scan Lists:
• Trunking Priority Monitor Scan List
• Conventional Scan List
• Talkgroup Scan List
Please refer to a qualified radio technician for the
maximum number of Scan Lists can be programmed
47
English