If Your Extractor Hood Has Decorative Ducts - John Lewis JLBIHD622 User Manual

If Your Extractor Hood Has Decorative
Ducts
8 Make sure that the electrical power supply is within the
measurements for the decorative connector.
9 Remove the four screws holding the lid of the cooker
hood and lift the hood off.
10 Mark the position of the support bracket on the wall.
11 Drill holes for the support bracket.
Cooker hood user guide
12 Adjust the width of the support bracket, then screw it to
the wall.
13 Connect the air exhaust tube to the cooker hood.
14 Slide the top duct into the bottom duct.
15 Insert screws and tighten to fasten the bottom duct to the
cooker hood.
13