Standby Suspend; Hibernate Suspend - Ctl 2GO Classmate PC User Manual

Suspend Mode

Standby Suspend

The system automatically enters this mode after a period of
inactivity, which is set in the Power Schemes dialog box. In
Standby mode, hardware devices, such as display panel and hard
disk, are turned off to conserve energy.

Hibernate Suspend

In this mode, all system data are saved in the hard disk before
powering down. When this mode is activated, all system state and
contents are saved to the hard disk drive after a period of inactivity
defined by the user.
No power or very little power is drawn from the battery module
under this mode.
However, depending on how much RAM that has been installed on
your computer, the amount of time the system requires to restore
all its previous contents can range from five to 20 seconds.
Power Button Action
A classmate PC's power button can be set to turn off the system or
activate the suspend mode.
25