Power Cord Requirement; U.s. And Canada - Ctl 2GO Classmate PC User Manual

The equipment must also be installed using an acceptable method
of connection. The customer should be aware that compliance with
the above conditions may not prevent degradation of service in
some situations.
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas.
connections themselves, but should contact the appropriate
electric inspection authority, or electrician, as appropriate.

Power Cord Requirement

The power cord supplied with the AC adapter should match the
plug and voltage requirements for your local area. Regulatory
approval for the AC adapter has been obtained using the power
cord for the local area.
However, if you travel to a different area and need to connect to a
different outlet or voltage, you should use one of the power cords
listed below. To purchase a power cord (including one for a country
not listed below) or a replacement AC adapter, contact your local
dealer.

U.S. and Canada

•
The cord set must be UL/ETL-Listed and CSA-Certified or
UL/C-ETL Listed.
•
The minimum specifications for the flexible cord are (1) No. 18
AWG, (2) Type SPT-2, and (3) 2-conductor.
•
The cord set must have a rated current capacity of at least 7A.
•
The attachment plug must be an earth-grounding type with a
NEMA 1-15P (7A, 125V) configuration.
6
Users should not attempt to make such