Battery Pack Safety - Ctl 2GO Classmate PC User Manual

Japan
•
All components of the cord set (cord, connector, and plug)
must bear a "PSE" mark and registration number in
accordance with the Japanese Dentori Law.
•
The minimum specifications for the flexible cord are: (1) 0.75
2
mm conductors, (2) Type VCT or VCTF, and (3) 3-conductor.
•
The cord set must have minimum rated current capacity of 7 A.
•
The attachment plug must be a two-pole, grounded type with a
Japanese Industrial Standard C8303 (15 A, 125 VAC)
configuration.
Other Countries
•
The cord set fittings must bear the certification mark of the
agency responsible for evaluation in a specific country.
Acceptable agencies are:
CCC (China)
•
The flexible cord must be of a HAR (harmonized) type HO5VV-
F 3-conductor cord with a minimum conductor size of 0.03
square inches.
•
The minimum specification for the flexible cord for Class II
product are: (1) 2X0.75 mm
•
The cord set must have a current capacity of at least 10 A and
a nominal voltage rating of 125 / 250 VAC.
THE FOLLOWING
Manufacture: LI SHIN INTERNATIONAL ENTERPRISE CORP.
Manufacture: Delta

Battery Pack Safety

•
The battery pack is intended to use only with this notebook.
•
The battery pack is not replaceable by the end user. Only
qualified service technicians should replace the battery pack.
•
Do not disassemble the pack.
•
Do not dispose of the battery pack in fire or water.
•
To avoid risk of fire, burns, or damage to your battery pack, do
not allow a metal object to touch the battery contacts.
•
Handle a damaged or leaking battery with extreme care. If you
come in contact with the electrolyte, wash the exposed area
2
conductors, (2) 2-conductor cord.
This model IS DESIGNED TO USE WITH
AC ADAPTER MODEL ONLY
7