Radio - Kenwood KMM-203 Instruction Manual

GETTING STARTED
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band
( RADIO). ; MIX: Memorizes one station for each preset button,
regardless of the selected band.
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
TDF ALARM ON: Activates the alarm if you forget to detach the faceplate when ACC is
set to OFF. ; OFF: Deactivates.
SOURCE SELECT
PANDORA SRC
(For
ON: Enables PANDORA in source selection. ; OFF: Disables. ( 10)
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 9)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
ENGLISH Select the display language for [FUNCTION] menu and music
information if applicable.
TURKCE
By default, [ENGLISH] is selected.
)

RADIO

Supported band: FM1/FM2/FM3/AM/SW1/SW2
Search for a station
1
Press repeatedly to select TUNER.
2
Press repeatedly (or press
control) to select the band.
Press S / T (or press S /
3
search for a station.
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6)
(or press one of the number buttons (1 to 6) on the remote control).
Direct Access Tuning
(using the remote control)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
is automatically canceled.
/ on the remote
on the remote control) to
2
, Direct Access Tuning
5
ENGLISH