CONTENTS BEFORE USE BEFORE USE IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe BASICS Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference. GETTING STARTED 1 Select the display language WARNING...
BASICS Faceplate Remote control (RC-406) Remote sensor (Do not Display window Volume knob expose to bright sunlight.) Pull out the insulation sheet when using for the first time. * Not used Detach button Attach Detach How to reset How to replace the battery Your preset adjustments will be erased except stored radio stations.
GETTING STARTED To set the date Turn the volume knob to select [DATE FORMAT], then press the knob. Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob. Turn the volume knob to select [DATE SET], then press the knob. Turn the volume knob to make the settings, then press the knob.
: Search for a preset station. For details on how to update the firmware, visit MANUAL : Manually search for a station. <www.kenwood.com/cs/ce/>. • To store a station: Press and hold one of the number buttons (1 to 6). CLOCK • To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on the remote control).
Page 6
RADIO Other settings PTY SEARCH 1 Turn the volume knob to select the available Program Type, then press the knob. Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select the PTY language (ENGLISH/FRENCH/ Turn the volume knob to select an item (see the following table), GERMAN), then press the knob.
When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.
Page 8
While in ANDROID source, press 5 repeatedly. BROWSE MODE : Control Android device from this unit via Turn the volume knob quickly to browse through the list quickly. KENWOOD MUSIC PLAY application installed in the Android device. Skip Search (applicable only for iPod and ANDROID source)
USB/iPod/ANDROID Preparation: Direct Music Search (using the remote control) Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. ( 5) Press DIRECT. Press the number buttons to enter a file number. Start listening Press to search for music. Connect a portable audio player (commercially available). •...
Pandora® (for Preparation: Create and save a new station Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora. Press • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 5) Turn the volume knob to select [NEW STATION], then press the knob.
AUDIO SETTINGS Pandora® (for While listening to any source... Delete a station Press AUD to enter [AUDIO CONTROL] directly. While listening to PANDORA... Turn the volume knob to select an item (see the following table), then press the knob. Press Repeat step until the desired item is selected or activated.
DISPLAY SETTINGS AUDIO SETTINGS Set the dimmer PRESET EQ DRIVE EQ/TOP40/POWERFUL/ROCK/POPS/EASY/JAZZ/NATURAL/ USER: Selects a preset equalizer suitable to the music genre. Press and hold DISP (DIMMER) to turn on or off the dimmer. (Select [USER] to use the settings made in [EQ PRO].) •...
• If this does not solve the problem, the connected Android to the radio. device is unable to route the audio signal to unit. ( 15) • Make sure KENWOOD MUSIC PLAY APP is installed on the “READING” keeps flashing. Do not use too many hierarchical levels or folders.
– iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.
INSTALLATION/CONNECTION REFERENCES About Android device Warning • This unit supports Android OS 4.1 and above. • The unit can only be used with a 12 V DC power supply, negative ground. • Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory (AOA) 2.0. •...
Page 16
INSTALLATION/CONNECTION Installing the unit (in-dash mounting) When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied). Do the required wiring.
Page 17
To the terminal that is grounded when the To front speaker (right) Gray/Black (Mute control wire) telephone rings or during conversation ( 14) Green (To connect the Kenwood navigation system, refer your navigation manual.) To rear speaker (left) Green/Black Purple To rear speaker (right)
(for Preparation: On the faceplate On the remote control Install the latest version of iHeart Link for KENWOOD application on Press Press Playback/pause your device (iPhone/iPod touch), then create an account and log in to Press T. iHeartRadio. Skip a track for custom station...
Page 20
Make sure you have installed the latest version of the iHeart Link for THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS KENWOOD application on your device. IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, “PLEASE LOGIN”...
Page 21
ﻟﺘﻄﺒﻴﻖiHeart Link ﺗﺄﻛﺪ ﻣﻦ ﺃﻧﻚ ﻗﻤﺖ ﺑﺘﺜﺒﻴﺖ ﺃﺣﺪﺙ ﺇﺻﺪﺍﺭ ﻣﻦ “IHEARTLINK UP” THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS . ﻋﻠﻰ ﺟﻬﺎﺯﻙKENWOOD IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR .ﻟﻢ...