References; Maintenance; More Information - Kenwood KMM-203 Instruction Manual

Digital media receiver
Hide thumbs Also See for KMM-203:
Table of Contents


New station creation is unsuccessful.
Check the Pandora application on your device.
The skip limit has been reached.
No stations are found.
The number of registered stations has reached
its limit. Retry after deleting unnecessary
stations from your device.
Communication is unstable.
Registration of thumbs up/thumbs down has
failed due to insufficient network connectivity.
Registration of thumbs up/thumbs down is
not allowed.
You try to access from a country which Pandora
is not deliverable.
Muting upon the reception of a phone call
Connect the MUTE wire to your telephone using a commercial telephone
accessory. ( 17)
When a call comes in, "CALL" appears. (The audio system pauses.)
• To continue listening to the audio system during a call, press
"CALL" disappears and the audio system resumes.
When the call ends, "CALL" disappears. (The audio system resumes.)



Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector
Detach the faceplate and clean the connector gently with a cotton
swab, being careful not to damage the connector.

More information

For: – Latest firmware updates and latest compatible item list
– Any other latest information
Visit <>.
Playable files
• Playable audio file for USB mass storage class device: MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac)
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed above, playback may be impossible depending on
the types or conditions of media or device.
• For detailed information and notes about the playable audio files, visit
About USB devices
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.
About iPod/iPhone
Made for
– iPod touch (2nd, 3rd, 4th, 5th, and 6th generation)
– iPod classic
– iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
– iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE
• You cannot operate iPod if "KENWOOD" or " " is displayed on iPod.
• Depending on the version of the operating system of the iPod/iPhone, some functions may not operate
on this unit.
Connector (on the reverse
side of the faceplate)

Hide quick links:


Table of Contents

This manual is also suitable for:


Table of Contents