Kenwood KMM-203 Instruction Manual page 17

INSTALLATION/CONNECTION
Wiring connection
IMPORTANT: We recommend installing the unit with a
commercially available custom wiring harness specific for your car
and leave this job to professionals for your safety. Consult your car
audio dealer.
When connecting to an external amplifier, connect its ground wire
to the car's chassis to avoid damaging the unit.
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Car fuse box
Ignition switch
Car fuse box
Battery
To the metallic body or chassis of the car
Fuse (10 A)
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
If no connections are made, do not let the wire come out from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
(12 V 350 mA)
Light blue/yellow
(Steering remote control
wire)
Output terminals
Antenna terminal
To the terminal that is grounded when the
telephone rings or during conversation ( 14)
(To connect the Kenwood navigation system,
refer your navigation manual.)
To the power control terminal when using the
optional power amplifier or to the antenna
control terminal in the vehicle
To the steering wheel remote control adapter
ENGLISH
17