Option
VT for Direct I/O
Trusted Execution
Table 11. Wireless
Option
Wireless Switch
Wireless Device Enable
Table 12. Maintenance
Option
Service Tag
Asset Tag
BIOS Downgrade
Data Wipe
48
Description
•
Enable Intel Virtualization Technology (Default Setting)
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the
additional hardware capabilities provided by Intel Virtualization
technology for direct I/O.
•
Enable Intel VT for Direct I/O (Default Setting)
This option specifies whether a Measured Virtual Machine Monitor
(MVMM) can utilize the additional hardware capabilities provided by Intel
® Trusted Execution Technology. The TPM Virtualization Technology,
and Virtualization Technology for Direct I/O must be enabled to use this
feature. This option is disabled by default.
•
Trusted execution
Description
Allows you to determine which wireless device can be controlled by the
wireless switch. The options are:
•
WWAN
•
WLAN
•
GPS (on WWAN Module)
•
Bluetooth
All options are enabled by default.
Allows you to enable or disable the wireless devices. The options are:
•
WWAN/GPS
•
WLAN
•
Bluetooth
All options are enabled by default.
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
This field controls flashing of the system firmware to previous revisions.
•
Allow BIOS Downgrade
This field allows users to securely erase data from all the internal storage
devices.
•
Wipe on Next Boot
Selecting this operation will securely erase all devices installed in the
system. The following is a list of devices affected by this operation:
•
Internal HDD