Installing the base cover
1.
Slide the base cover to align with the screw holes on the computer.
2.
Tighten the screws to secure the base cover to the computer.
3.
Install the:
a.
battery
b.
battery cover
4.
Follow the procedure in
Removing the hard drive
1.
Follow the procedure in
2.
Remove the:
a.
battery cover
b.
battery
3.
Perform the following steps as shown in the illustration:
a. Remove the screws that secure the hard drive to the computer [1].
b. Lift the hard-drive latch to the unlock position [2].
c. Slide and lift the hard drive from the computer [3].
After working inside your
Before working inside your
computer.
computer.
11