Installing The Speakers; Removing The Input/Output (I/O) Board Left - Dell Precision 17 7710 Owner's Manual

Installing the speakers

1. Align the speakers along the slots on the computer.
2. Route the speaker cable through the routing tabs on the computer.
3. Connect the speaker cable to the system board.
4. Install the:
a. palmrest
b. keyboard
c. hard drive
d. base cover
e. battery
f. battery cover
5. Follow the procedure in

Removing the Input/Output (I/O) board left

1. Follow the procedure in
2. Remove the:
a. battery cover
b. battery
c. base cover
d. hard drive
e. keyboard
f. palmrest
3. Perform the following steps to remove the I/O board:
a. Remove the screws that secure the I/O board to the computer [1, 3].
b. Remove the bracket of the thunderbolt connector [2].
c. Lift the right edge of the I/O board upwards to disengage the connector and remove it from the
computer [4].
24
After working inside your
Before working inside your
computer.
computer.