Dell Precision 17 7710 Owner's Manual page 45

Option
Intel TurboBoost
Hyper-Thread Control
Table 8. Power Management
Option
AC Behavior
Auto On Time
USB Wake Support
Wireless Radio Control
Wake on LAN/WLAN
Description
Allows the computer to power-on automatically, when AC adapter is
plugged. The option is disabled.
• Wake on AC
Allows you to set the time at which the computer must turn on
automatically. The options are:
• Disabled (Default Setting)
• Every Day
• Weekdays
• Select Days
Allows you to enable the USB devices to wake the computer from
standby mode. The option is disabled
• Enable USB Wake Support
Allows you to control the WLAN and WWAN radio. The options are:
• Control WLAN radio
• Control WWAN radio
Default Setting: both the options are disabled.
This option allows the computer to power up from the off state when
triggered by a special LAN signal. Wake-up from the Standby state is
unaffected by this setting and must be enabled in the operating system.
This feature only works when the computer is connected to AC power
supply.
• Disabled - Does not allow the system to power on by special LAN
signals when it receives a wake-up signal from the LAN or wireless
LAN. (Default Setting)
• LAN or WLAN - Allows the system to be powered on by special LAN
signals or WLAN signals.
• LAN Only - Allows the system to be powered on by special LAN
signals.
Description
you to enable or disable the additional
processor sleep states.
Default Setting: C states.
Allows you to enable or disable the Intel
TurboBoost mode of the processor.
Default Setting: Enable Intel
TurboBoost
Allows you to enable or disable the
HyperThreading in the processor.
Default Setting: Enabled
45