Installing the display bezel
1.
Connect the eDP cable.
2.
Align the display panel and tighten the screws to secure display panel to the display cover.
3.
Slide the display bezel from the bottom and press on the display bezel.
4.
Work around the entire bezel until it snaps onto the display assembly.
5.
Install the:
a.
display assembly
b.
palmrest
c.
keyboard
d.
hard drive
e.
base cover
f.
battery
g.
battery cover
6.
Follow the procedure in
Removing the camera
1.
Follow the procedure in
2.
Remove the:
a.
battery cover
b.
battery
c.
base cover
d.
hard drive
e.
keyboard
f.
palmrest
g.
display assembly
h.
display bezel
3.
Perform the following steps as shown in the illustration.
a. Disconnect the camera cable from the computer [1].
b. Remove the camera module from the computer [2].
32
After working inside your computer
Before working inside your
computer.