Table of Contents
Advertisement
Extension ring delay
You can set your Ultimate 106 to delay ringing
certain extensions when a call comes in. For
example, if you want extension 11 to ring before
any others, then you need to put a delay on all
the other extensions.
From your master phone, extension 11:
To set the ring delay
In program mode.
Enter this code.
2
Enter the extension number you
Ext
require (
-
).
1
6
#
To confirm.
Delay
Enter the Ring Delay you want
= No Delay (
0
Enter when you want the ring delay
to apply.
1
Day mode only.
Night mode only.
2
3
Day and night mode.
Your Ultimate 106 announces the
extension and ring delay.
ring delay is 3 rings"
or (night mode) if applicable.
Replace the handset back on the cradle.
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
-
= 1-9 rings).
1
9
"Extension 13,
and (day mode)
Day and night modes
You can set which extensions you want to ring
during the day and which ones you want to ring
at night. You can also set the times when day and
night modes begin and end.
The default (original) setting is for all connected
extensions to ring at all times.
For example:
At home you could set just one extension phone
to ring at night, so no one else will be disturbed
should someone ring you.
At work, you could set one phone only to ring
during office hours so a receptionist can answer
all calls. Outside office hours, all extensions can
ring so any available person can take the call.
11
Advertisement
Table of Contents
