Advertisement
7. Make Sure Base is a minimum 80%
on Vehicle Seat.
8. Extend the EZ Tight™ LATCH Strap.
Press in and hold on the blue release button
on the EZ Tight™ LATCH retractor and pull the
LATCH strap until it is fully extended.
9. Attach Each LATCH Connector to
Vehicle's Lower LATCH Anchors.
LATCH strap should not be twisted. If twisted,
you will not be able to tighten the LATCH
system.
LATCH can only be used if the vehicle
LATCH anchor spacing is 11 inches (28 cm)
from the center of one LATCH anchor to the
center of the other LATCH anchor.
52
Click!
Advertisement
